ANSI SCTE 84-1 pdf free download

ANSI SCTE 84-1 pdf free download.HMS Common  Inside Plant Management Information Base (MIB ) Part 1: SCTE-HMS-HE-COMMON-MIB.
COPYRIGHT
The MIB definition found in this document may be incorporated directly in products without further permission from the copyright owner, SCTE.
NORMATIVE REFERENCE
IETF RFC2578, Structure of Management Information Version 2 (SMIv2)
IETF RFC2579, Textual Conventions for SMIv2
IETF RFC2580, Conformance Statements for SMIv2
IETF RFC2737, Entity MIB (Version 2)
ANSI/SCTE 36 ,SCTE Root Management Information Block (MIB)
SCTE 38-1 1, Hybrid Management Sub-layer Management Information Base (MIB) Part 11: SCTE-HMS-HEADENDIDENT-MIB
IETF RFC2573, SNMP Applications
IETF RFC 1907, Management Information Base for Version 2 of the Simple Network Management Protocol (SNMPv2)
ANSI/SCTE 38-1, Hybrid Management Sublayer Management Information Blocks (MIB) Part 1: Property MIB
INFORMATIVE REFERENCE
None
TERMS AND DEFINITIONS
This document defines the following terms:
Management Information Base (MIB) – the specification of information in a manner that allows standard access through a network management protocol.
REQUIREMENTS
This section defines the mandatory syntax of the SCTE- HMS-HE-COMMON-MIB. It follows the IETF Simple Network Management Protocol (SNMP) for defining managed objects.
–Module Name: HMSI 1 1R9.MIB (SCTE 84-I)
— SCTE Status: Adopted
SCTE-HMS-HE-COMMON-MIB DEFINITIONS ::= BEGIN
IMPORTS
Integer32. MODULE-IDENTITY. OBJECT-TYPE, NOTIFICATION-TYPE FROM SNMPv2-SMI
DisplayString, DateAndTime
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF
entPhysical index
FROM ENTITY-MIB
setcH msTree
FROM SCTE-ROOT — see SCTE 36 (formerly HMSO28)
heCommon, HeTenthCentigrade
FROM SCTE-HMS-HEADENDIDENT-MIB — see SCTE 38-11 (formerly HMSI 14)
heCommonMib MODULE-IDENTITY
LAST-UPDATED “2(X)302 1 70(XX)Z” — February 17, 2(X)3
ORGANIZATION “SCTE HMS Working Group’
CONTACT-INFO
‘SCTE HMS Subcommittee, Chairman
inailto: standards@scte.org
DESCRIPTION
“The MIB module is for representing general information about optical equipment present in the headend (or indoor) and is supported by an SNMP agent.”
REVISION “200302 170000Z” — February 17. 2003
DESCRIPTION
Incorporated RTF comments posted by January 10. 2003.
instance of discreteAlarmState, and each instance of currentAlarmState shall remain in the state prior to detectionDisablcd( I) being applied.
The deectionEnahled(2) value permits alarm detection to run. The detection process continues from the state the headend entity was in prior to detectionEnabled(2) being set.
The delectionEnabledAndRegenerate( 3) value clears all alarm information and permits alarm detection to run. All alarm properties. both discrete and analog, are restored to the nominal value before alarm detection runs. Any properties that are in an alarm state SHALL NOT produce a ‘return to normal’ alarm as part of the process. Setting this value clears the heCommonLogTablc and the c urrentAlarmTable.
The detectionEnahledAndRegenerate(3) value is transient, that is a SET request with a value detectionEnabledAndRegnerate(3) shall return the same value detectionEnabledAndRegnerate(3). Subsequent GET requests shall return a value detectionEnabled(2).
The detectionDisahled( I) value shall affect the generation of heCommonAlarmEvent trap only. Traps added in the future are assumed to be unaffected by this object, unless stated in the description of that trap.
This object has a default value of detectionEnabled(2).
“The current number of entries in the heCommonLogTable. Before the very first wrap-around condition occurs for heCommonLogindex. heCommonLogNumberOt’Entries will return the total number of entries logged in heCommonLogTable, since the unit was powered up.
After the first wrap-around condition has occured for for the value of the M113 variable heCommonLogindex. heCo inmonLogN umberOt’Entries will ret urn the maximum number of rows the heCommonLogTable can hold.
ANSI SCTE 84-1  pdf download.