ANSI CTA 2063 pdf free download

ANSI CTA 2063 pdf free download.Small Unmanned Aerial Systems Serial Numbers.
2 References 2.1 Informative References The following references contain provisions that, through reference in this text, constitute informative provisions of this standard. At the time of publication, the edition indicated was valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent edition of the standard indicated below. 2.1.1 Informative Reference List 1.3GPP TS 23.003, Numbering, addressing and identification 2.1.2 Informative Reference Acquisition 1.3GPP, 650, route des Lucioles, 06921 Sophia Antipolis Cedex, France, Www.3GPP .org 2.2 Compliance Notation As used in this document“shall” and“must” denote mandatory provisions of the standard. “Should” denotes a provision that is recommended but not mandatory.“May” denotes a feature whose presence does not preclude compliance, and implementation of which is optional. “Optional” denotes items that may or may not be present in a compliant device.2.3 Symbols and Abbreviations ESN Electronic Serial Number IMEISV International Mobile Station Equipment Identity and Software Version MFR Manufacturer PSN Physical Serial Number UAS Unmanned Aircraft Systems 3 Serial Number General All UASs shall be assigned a unique serial number that becomes part of a Physical Serial Number (PSN), to be printed on the UAS, and an Electronic Serial Number (ESN) that may be associated with the UAS.3.1 Physical Serial Number Each PSN shall comprise three basic components: the Manufacturer’s Code, the Length Code, and the Serial Number. PSN = [Manufacturer’s Code][Length Code] [Serial Number] CTA, in collaboration with all stakeholders, is responsible for developing and maintaining procedures that specify the procedure to be followed pertaining to the acquisition and regulation of the PSN Manufacturer’s Codes. As Manufacturer Code Administrator, CTA manages the PSN Manufacturer’s Code component. The remaining segment of the PSN, the Serial Number, will be directly administered by the manufacturer to which the PSN Manufacturer Code is assigned. 3.1.1 Physical Serial Number – Format The format of the PSN is: PSN = [4 Character MFR CODE] [1 character LENGTH CODE][20 character SERIAL NUMBER] The Manufacturer (MFR) Code is a 4 character alphanumeric code (Note: MFR Codes shall include any combination of digits and uppercase letters, except the letters 0 and I, but may include all digits.) The Length Code is a single alpha character that corresponds to the number of characters in the serial number that is included in the PSN. The alpha characters range from A to T signifying the range of 1 to 20 characters in the serial number (e.g., A= 1, B=2,H=8, T=20). The L ength Code will not be included in the ESN. The Serial Number, which is generated by the manufacturer, is an alphanumeric code with a maximum of 20 characters (Note: Serial Number shall include any combination of digits and uppercase letters, except the letters 0 and I, but may include all digits.) The actual number of characters used by the manufacturer shall be indicated by the preceding Length Code.3.2 Electronic Serial Number Each ESN shall comprise four basic components: the Manufacturer’s Code, the Serial Number, the IMEISV Identifier, and Performative Characteristics. ESN = [Manufacturer’s Code] [Serial Number] [IMEISV] [Performative Characteristics] 3.2.1 Electronic Serial Number – Format The format of the ESN is: ESN = [4 Character MFR CODE] [20 character SERIAL NUMBER] [16 character IMEISV] [7 Performative Characteristics] The ESN is a fixed format and therefore when transmitted the ESN is always transmitted as 47 characters.ANSI CTA 2063 pdf download.